Oilem
  • Home
  • Contact
  • Products
  • Help Articles
    • Air Intake Cleaning
    • Carbon Cleaners
    • Cetane Boosters
    • DPF Cleaning & Maintenance
    • EGR Cleaning & Maintenance
    • Engine Oils
    • Engine Tuning / Mapping & Tuning Boxes
    • Fleet & Commercial Solutions
    • Fuel Addtives
    • Fuel Quality
    • Fuel Saving
    • Fuel System Cleaning
    • Heating Oil Additives
    • Misfuelling Devices
    • Oil Additives
    • Reducing Emissions
    • TFSI Direct Injection Carbon
    • Turbo Cleaning & Maintenance
    • Waterless Engine Coolant

Tag Archives: airflow sensor cleaners

Carbon Cleaner
Carbon Cleaners, Fuel Addtives, Fuel System Cleaning

Fuel & Carbon Cleaners – What Happens to the Carbon?

March 10, 2015 Oilem 2 Comments

Frequently we are asked about fuel-based carbon cleaners. Specifically, what happens to carbon deposits that are removed through the use of fuel cleaners and can these cleaners damage an engine?

Let’s begin by discussing the first part of that question.

Within the fuel system you’ll seldom find carbon itself. You are more likely to discover sludge, gum, varnish, debris, and similar deposits. The larger deposits are captured by the fuel filter. These and other deposits that have found their way through the fuel system are normally dissolved and dispersed in a controlled and manageable way using dispersal-based detergents. That’s why it is important to use additives at the recommended dosage so that deposit removal is completed in a controlled manner. High-strength fuel system cleaners that carry out this process normally contain a lubricant to ensure the entire system is lubricated during the cleaning procedure. This too minimizes the risk of any issues.

Most actual carbon formation occurs in the combustion chamber and post combustion areas. This includes the hot side of the turbo, intake, inlet valves, EGR, catalytic convertor, DPF, and the remainder of the exhaust tract. The reason why carbon remains is because there is insufficient heat to burn it off. Chemically, a liquid hydrocarbon fuel – such as gasoline or diesel – is very similar to the solidified fuel (carbon) that it creates. The difference is that to ignite and burn solid carbons a higher temperature must be reached because the flash point has changed.

High-quality fuel detergents, combined with fuel catalyst technology, reduce the threshold temperature at which the carbons can burn and therefore enable natural engine processes and inherent heat to gradually “burn off” the deposits. This is certainly the case for combustion chamber deposits.

Sometimes there also is a degree of active cleaning from any cleaning chemistry that is able to survive the combustion process and thus is still active post combustion. However, most carbon is removed by reducing the temperature at which it can burn as described above.

It is important to note that there also is a natural cleaning mechanism. When the combustion process is of sufficient quality – normally through an efficient fuel system (no injector deposits), sufficient fuel quality (more often than not, only achieved with fuel conditioners), and an engine that is up to full operating temperature – engines are designed to self-manage carbon build-up. The clean(ish) gases will naturally remove carbons with the aim of maintaining a respectable level.

The issue arises when this equilibrium is broken and more carbons are deposited than can be naturally removed. This could be due to a flawed engine design, poor fuel quality, fuel system deposits, driving style, failure to let the engine get up to the proper temperature, etc., or a combination of these.

This is why catalyst technology is so important in carbon cleaning and for keeping a system clean. When a catalyst is added to the fuel, it improves the quality of combustion to such a degree that it reduces the amount of hydrocarbons that are created, particularly when the engine is cold. These cleaner gases then get to work together, with the active work the catalyst is doing, to reduce the temperature at which these deposits can burn and be removed.

Essentially, a high-end fuel cleaner and carbon remover provides an environment where the quality of the combustion is much better and the exhaust gasses are much cleaner. The cleaner exhaust gasses will naturally scavenge and remove carbons from the combustion and the post combustion areas. The caveat is that this process requires heat. The catalyst will reduce the temperature at which the carbons can be removed and burned off, but it also needs heat.

This is why it is incredibly difficult for such chemistries to clean the EGR system. The problem is that an EGR and intake are designed to cool recirculating exhaust gasses. By doing so, they reduce the efficacy of any post combustion cleaner or chemistry. Unfortunately this also applies to the rear of the intake valves of direct poor injection engines. Those two areas are very difficult to clean because the gasses going through are cooled.

Also it is difficult to remove existing deposits in these areas. However, by using a high-quality conditioner with the fuel catalyst in both diesel and petrol applications, you’ll at least give the engine and emission control components a much easier life. This is because the engine and emissions systems will have fewer carbons to manage. This results in fewer deposits and hopefully removes the need to use high-strength cleaners or invasive measures to remove carbons manually.

What about the safety of cleaners and the risk of fuel system or engine damage?

Providing products are used as per the instructions, the risk of any damage is incredibly low. In fact, the few rare cases of alleged damage we have seen weren’t actually caused by the product. The product just revealed or exacerbated an underlying mechanical issue with the fuel system. This is incredibly rare.

Furthermore, manufactures err on the side of caution, so even if a product is used aggressively or improperly, it is still likely to be safe to use up until a certain point. For example, one of our main fuel conditioners is EPA tested. As part of the procedure the product is tested at ten times the recommended dose to ensure no possible harm to the fuel system or engine.

To summarise, fuel system deposits are generally dissolved, dispersed, and combusted naturally. Carbon is generally combusted through the use of heat and an added fuel catalyst and/or fuel borne catalyst. They are proven safe processes when used correctly and responsibly.

airflow sensor cleanersar6200carbon cleanercarbon removaldpf cleanerdpf cleanersdpf cleaningdpf removalegr cleaneregr cleaningfuel additivefuel additivesfuel catalystfuel conditioner
Air flow Sensor Cleaner
Air Intake Cleaning

Mass Airflow Sensor (MAF) Cleaning & Cleaners

January 10, 2014 Oilem 6 Comments

A Mass Airflow Sensor (MAF) is used to measure the amount of air entering an engine. It is important to measure air so that the ECU can calculate the correct amount of fuel to inject into the combustion chamber to achieve the optimum air/fuel ratio. Because of the MAF’s important role, it should be attended to regularly, just as you would an air filter.

MAFs got their name because they are designed to calculate the entire mass of air rather than just the flow rate. This helps the ECU better respond to differences in air density from changes in temperature and air pressure. However, Air Intake Temperature (IAT) sensors and in many cases Mass Pressure (MAP) sensors are still required.

The most common MAF type is the hot wire. This pre-heated filament, when hit with air, cools and creates a change in electrical resistance. This subsequently results in a change of the voltage signal (normally between 0 and 5 volts) sent to the ECU.

Over time, the hot wire on the sensor can accumulate debris, dust, and sometimes oil particulates, especially if an aftermarket filter or induction kit is fitted, as the filter is normally coated with an oil to trap fine dust. As a result, this oil and debris can make its way onto the sensor, which in turn affects the accuracy of the airflow signal to the ECU. This can result in poor engine running, hesitation, increased emissions, reduced MPG, and so on.

Unfortunately, even the most modern ECUs are unable to detect this degradation of performance. An error code or warning light will only appear if the unit has failed completely.

The solution is to clean the MAF at each service schedule with a designated MAF cleaner. Standard electrical contact cleaners also are effective, but make sure that they do not leave any residue. Also, bear in mind that they usually contain a single basic solvent whereas professional MAF cleaners contain a blend of multiple solvents specifically for the type of debris that needs to be removed, making the job a little easier.

We recommend Archoil AR2810 MAF Cleaner as it contains 300ml of the best solvents available for exactly this task. It also is completely safe for all MAF materials and plastics, leaves absolutely zero residue, and is comparable in cost to basic contact cleaners when considering the size of the can.

Archoil AR2810 MAF Cleaner can be purchased here

If you require any expert advice or help, please don’t hesitate to contact us and either I or a member of my team will be pleased to assist you.

airflow sensor cleanersar2810crc cleanercrc maf cleanermaf cleanermaf sensor cleaner

categories

Categories
  • Air Intake Cleaning (1)
  • Carbon Cleaners (6)
  • Cetane Boosters (1)
  • DPF Cleaning & Maintenance (2)
  • EGR Cleaning & Maintenance (2)
  • Engine Flush & Compression Restore (2)
  • Engine Oils (2)
  • Engine Tuning / Mapping & Tuning Boxes (2)
  • Fleet & Commercial Solutions (1)
  • Fuel Addtives (8)
  • Fuel Quality (2)
  • Fuel Saving (6)
  • Fuel System Cleaning (7)
  • Heating Oil Additives (1)
  • Misfuelling Devices (1)
  • Oil Additives (1)
  • Pentosin (1)
  • Reducing Emissions (1)
  • TFSI Direct Injection Carbon (1)
  • Turbo Cleaning & Maintenance (1)
  • Uncategorized (1)

Archives

  • July 2020
  • April 2020
  • March 2019
  • January 2017
  • February 2016
  • January 2016
  • September 2015
  • May 2015
  • April 2015
  • March 2015
  • February 2015
  • November 2014

Twitter Feeds

Tweets by @OilemBlog

Tag Cloud

Tags
airflow sensor cleaners ar6200 BS EN590 BS EN590 diesel carbon removal contaminated fuels D2699 knock engine dpf cleaner dpf cleaners dpf cleaning dpf removal egr cleaner egr cleaning engine mapping engine oil engine oil manufacturers engine oil quality fuel additive fuel additives fuel catalyst fuel conditioner fuel conspiracy Fuel Economy fuel saver fuel savers fuel saving fully synthetic oil gas saver gas savers improve mpg increase gas mileage increase mpg low sap oil mpg mpg gains oil additives oil conspiracy poor quality fuels premium diesel pump diesel reduce fuel costs remap saps standard diesel tuning box

Oilem

Unit 14 Rookery Business Park,
Silver Street,
Besthorpe,
Attleborough,
Norfolk, NR17 2LD

Telephone: 01953 456 896
Email: support@oilem.com

Newsletter

Sign up to our newsletter for the latest tips and offers. Your privacy is important
to us and your information will not be shared.

* = required field

powered by MailChimp!

Copyright © 2011-2018 Oilem All Rights Reserved.

  • Privacy Policy
  • |
  • Terms of Use
  • |
  • Sitemap
  • |